SH-AZG PM VSD Laser-Cutting Air Station
A 1.25–1.55 MPa high-pressure station built for fibre laser cutting: dry, clean air protects cut quality, 7.5–37 kW.
SH-AZG PM VSD Laser-Cutting Air Station
A 1.25–1.55 MPa high-pressure station built for fibre laser cutting: dry, clean air protects cut quality, 7.5–37 kW.
Overview
Laser-cutting air is sensitive to both pressure and cleanliness: insufficient pressure causes dross and rough edges, while oil or moisture contaminates the protective lens and destabilises the cut. SH-AZG raises discharge pressure to 1.25–1.55 MPa and offers a 5-in-1 high-spec build on top of the 4-in-1 base, adding a treatment stage so dew point and oil content meet laser requirements. PM VSD follows the cutting cycle, cutting idle energy.
Key features
1.25–1.55 MPa for medium and thick plate cutting.
Multi-stage treatment controls dew point and oil to protect lens and nozzle.
Standard 4-in-1, high-spec 5-in-1 with an extra stage.
Speed follows the cutting cycle, lowering idle and piercing energy.
Model data
Models in this family
| Model | kW | MPa | FAD (m³/min) | Noise dB(A) | Cooling | Outlet | L×W×H (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| SH-7.5AZG | 7.5 | 1.25 | 0.24-0.7 | 62±2 | — · 4-in-1 high | G3/4 | 1140×600×1270 | 220 |
| SH-11AZG | 11 | 1.55 | 0.33-1.0 | 62±2 | — · 4-in-1 high | G3/4 | 1600×780×1520 | 390 |
| SH-15AZG | 15 | 1.55 | 0.46-1.3 | 62±2 | — · 4-in-1 high | G3/4 | 1600×780×1520 | 400 |
| SH-15AZG | 15 | 1.55 | 0.46-1.3 | 62±2 | — · 4-in-1 high | G3/4 | 1600×780×1320 | 395 |
| SH-22AZG | 22 | 1.55 | 0.8-2.3 | 65±2 | — · 4-in-1 high | G1 | 1600×780×1620 | 465 |
| SH-37AZG | 37 | 1.55 | 1.2-3.3 | 65±2 | — · 4-in-1 high | G1 1/2 | 1900×940×1880 | 645 |
| SH-15AZGX | 15 | 1.55 | 0.46-1.3 | 62±2 | — · 5-in-1 high | G3/4 | 1900×780×1860 | 520 |
| SH-22AZGX | 22 | 1.55 | 0.8-2.3 | 65±2 | — · 5-in-1 high | G1 | 1900×780×2120 | 560 |
| SH-37AZGX | 37 | 1.55 | 1.2-3.3 | 65±2 | — · 5-in-1 high | G1 1/2 | 2400×940×2200 | 830 |
